Victron BlueSolar Charge Controller MPPT 75/10, 75/15 & MPPT 100/15
Victron BlueSolar Charge Controllers have Ultra- fast Maximum Power Point Tracking (MPPT) system with advanced Maximum Power Point Detection in case of partial shading condition. The BlueSolar Charge Controller has flexible charge algorithm with automatic battery voltage recognition. When the temperature is high it has a special feature that has an over- temperature protection and power de- rating.
The Victron BlueSolar Charge Controller MPPT 75/10, 75/15, 100/15 has an ultra- fast MPPT controller when during a cloudy sky the light intensity is changing continuously, MPPT improves energy harvest up to 30% compared to PWM charge controller. A load output is connected to all loads, this prevents the battery from over- discharging. The load output is short circuit proof. BlueSolar Charge Controllers have a battery voltage of 12/24V auto select and a rated charge current of 10- 15A. Its Maximum PV open circuit voltage is within the range of 75- 100V and a self- consumption of 10mA.
Victron BlueSolar Charge Controller has an intelligent battery management which the battery will be recycled continuously between a partially charged state and the end of discharge state, this occurs when the battery is not at its full charge capacity within one day. Lead acid battery would destroy within weeks or months from this mode operation. BlueSolar Charge Controller has a peak efficiency of 98% with a battery life algorithm that monitors the state of charge of the battery and day by day increases the load disconnect level until the solar energy has fully recharged the battery. The load disconnect level is always modulated to ensure 100% recharge is achieved every week.