Selectronic SP PRO GO Series Inverter

Selectronic Inverter Chargers for Solar Hybrid Projects

Selectronic GO Series Inverter is the only grid connected version of SP PRO Series that doesn’t compromise backup power or battery charging capability. Selectronic incorporate solar, wind, hydro or a fuel generator, no matter where you are on the grid you can be sure you will never be without power.

Selectronic SP PRO GO Series Inverter

Australian made Inverter Chargers by Selectronic

The Selectronic SP PRO GO Series is an Australian Designed smarter bi- directional Inverter Charger that have been manufactured since 1981, they are traditionally strong and reliable multi- mode inverter that controls and manages every aspects of your energy needs. Selectronic SP PRO Inverter is a low distortion sine wave interactive inverter charger and automatic AC transfer switch with anti- chatter protection. Some Electricity utilities have limits on how much power a renewable system can export back to the grid. Selectronic Inverters has Fixed Export Limit feature which will give the utility assurance that your system will never export more than your allowable power to the electricity grid, while the client still gets the most power generated from the solar power system.

Selectronic SP PRO GO Series Inverter

Selectronic SP PRO GO Solar Hybrid – 3kW to 60kW AC Continuous Load

Selectronic SP PRO GO Series is a Solar Hybrid (Grid Connect) System that has inbuilt export control system with fixed export limits from 0KW to 60 KW. The Selectronic SP PRO GO Series Inverter is an uninterrupted power supply system with AC continuous load power from 3KW to 60KW. Selectronic Inverter is a peak demand management system that could operate without batteries. Operating Temperature range of a Selectronic GO Series Inverter is at -10 to 60Selectronic SP PRO GO Series Inverter is an AC or DC coupling compatible with energy shifting and peak lopping. Selectronic Inverter has SP LINK software to monitor your system with enabled battery shutdown override in case of emergency. The SP PRO series acts as a low voltage grid feeding inverter that would provide electricity when the grid is down.

Selectronic SP PRO Inverters offer grid- independence, outstanding reliability, ultimate flexibility, surge capabilities, power density and with a 10 year warranty.

Selectronic SP PRO GO Series Inverter

SP PRO GO Series Specifications

SPMC240-x.x SPMC241-x.x SPMC481 -x.x SPMC482-x.x SPMC1201-x.x SPLC1200-x.x SPLC1202-x.x
24V 24V 48V 48V 120V 120V 120V
3.0kW 4.5kW 5.0kW 7.5kW 7.5kW 15.0kW 20.Kw
SPMC240-0.0 SPMC241-0.0 SPMC481-0.0 SPMC482-0.0 SPMC1201-0.0 SPLC1200-0.0 SPLC1202-0.0
SPMC240-2.0 SPMC241-2.0 SPMC481-2.0 SPMC482-2.0 SPMC1201-6.0 SPLC1200-15.0 SPLC1202-20.0
SPMC240-2.5 SPMC241-2.5 SPMC481-3.0 SPMC482-3.0
SPMC241-3.0 SPMC481-4.0 SPMC482-4.0
SPMC241-3.5 SPMC482-4.9
SPMC482-5.0
SPMC482-6.0

AC Outputs

Maximum AC grid feed power x.x Value x.x Value x.x Value x.x Value x.x Value x.x Value x.x Value
Example:

SPMC240-2.5 = 2.5 kW export

SPMC241-3.5 = 3.5 kW export

SPMC481-0.0 = 0.0 kW export

0.0

2.0

2.5

0.0 kW

2.0 kW

2.5 kW

0.0 2.0 2.5

3.0

3.5

0.0 kW 2.0 kW 2.5 kW

3.0 kW

3.5 kW

0.0 2.0 2.5

3.0

4.0

0.0 kW 2.0 kW 2.5 kW

3.0 kW

4.0 kW

0.0 2.0 3.0 4.0 4.9

5.0

6.0

0.0 kW 2.0 kW 3.0 kW 4.0 kW 4.9 kW

5.0 kW

6.0 kW

0.0

6.0

0.0 kW

6.0 kW

0.0

15.0

0.0 kW

15.0 kW

0.0

20.0

0.0 kW

20.0 kW

Maximum AC load power from batteries: 30 seconds 7.5 kW 10.5 kW 12.0 kW 18.0 kW 18.0 kW 33.0 kW 38.0 kW
1 minute 5.4 kW 7.6 kW 8.7 kW 13.0 kW 13.0 kW 26.0 kW 35.0 kW
30 minutes 4.2 kW 6.7 kW 7.0 kW 11.25 kW 11.25 kW 23.0 kW 30.0 kW
60 minutes 3.2 kW 4.7 kW 5.3 kW 8.0 kW 8.0 kW 18.0 kW 24.0 kW
Continuous 3.0 kW 4.5 kW 5.0 kW 7.5 kW 7.5 kW 15.0 kW 20.0 kW
Maximum total output to load, AC source + inverter 15 kW + inverter rating (60 kW + inverter rating with optional external contactor) 30 kW

(60 kW with optional external contactor)

Nominal voltage during grid outage 240 V AC configurable 210 to 240 V AC
Total harmonic distortion during grid outage <3% @ 0-200% rated load
Frequency during grid outage 50 or 60 Hz +/-0.005% No Grid

 

AC Inputs

Nominal voltage 210 +/- 15% to 240 +/- 10% V AC
Nominal input frequency 50/60Hz configurable +/- 1% to 10%
AC transfer current capacity 63 A (250 A with optional external contactor) 125 A

(250 A with optional external contactor)

Maximum AC input source, (backup generator or grid) 15 kW (60 kW with optional external contactor) 30 kW

(60 kW with optional external contactor)

AC transfer time typical < 1/2 cycle
Maximum battery charging from grid 3.0 kW 4.5 kW 5.0 kW 7.5 kW 7.5 kW 15.0 kW  20.0 kW

 

DC Inputs

Rated DC input / DC voltage range (V DC) 24 V / 20 – 34 48 V / 40 – 68 120 V / 100 – 170
Battery capacity (range) up to 10, 000 Ah
Efficiency
Peak efficiency 95% 95% 96% 96% 97% 97.2% 97.2%
DC consumption: idle 6 W

 

General

DC circuit breakers internal 2 pole 250A
Operating temperature range -10 ˚C to 60 ˚C
Inverter display indicators Charger status, charge source, usable battery capacity remaining, alarms, AC status.
Renewable charging source Managed AC Coupling with any Selectronic Certified single phase inverter, DC renewable charge controller or generic AC coupled 1
Max PV Selectronic Certified = 2 x AC load rating. Other brands = 1 x AC load rating
Data logging storage Up to 2.5 years
SP LINK configuration and monitoring software Included as standard

 

Features

Battery temperature/Mid point battery voltage sense Yes / Yes
Battery compatibility Highly configurable battery charging set points allow integration with many battery chemistries including lithium.
Control inputs 4 of: 12V to 60V True, < 3V False
Shunt inputs Two user definable: Suitable for 25 A – 1000 A current shunts at 25mV – 100mV
Analogue inputs 2 general purpose logged 0-60V
Relay control outputs Relay: 4 of 60 V, 500 mA / Digital: 3 of 60 V DC, 5 mA
Communication Port 1 USB (slave) or RS232 (adjustable baud rate of up to 115200)
Communication Port 2 RS485 or RS232 (adjustable baud rate of up to 115200)
Dual & three phase configurable Yes with an SP PRO GO on each phase
Warranty 3 – 10 years (conditions apply, see website for details)

 

Standards

Safety – Uninterruptible Power Supply (UPS) IEC 62040-1-1:2002 / AS 6204 0-1-1:2003
Safety – Power converters used in PV Systems IEC 62109-1 and IEC 621 09-2
EMC (Domestic limits) EN 61000.6.3:2007
EMC (Industrial limits) EN 61000.6.4:2007
Grid Connect AS4777.2:2005, AS4777.3 :2005
Certification Certificate of Suitability, Ctick
Protection IP43

 

Options

Generator Backup Yes, using optional Grid Fail Generator backup module. Auto start generators only.
Batteryless operation Yes, works as an export controller using Batteryless Kit, Part no. 005072 or 005073
Weights & Dimensions
Weight: Packed / Unpacked with wall mount 39 kg / 35 kg 45 kg / 39 kg 45 kg / 40 kg 54 kg / 42 kg 52 kg / 42 kg 160 kg / 113 kg 163 kg / 115 kg
Dimensions: Packed / Unpacked h x w x d (mm) 810 x 500 x 350 / 690 x 375 x 220 1080 x 740 x 650 / 870 x 540 x 290