Sanden Eco Plus Hot Water Heat Pump
The range of Sanden Eco Plus Hot Water Heat Pumps are a highly energy efficient replacement for your traditional electric hot water system and the most energy efficient hot water heat pump currently available on the market.
A Sanden Eco Plus Hot Water Heat Pump uses industrial leading technology found in refrigeration and air conditioning units, where energy is drawn in from the surrounding air and converted to heat. The Sanden Eco Plus has ozone friendly refrigerant R744 (CO2) absorbs heat then the warm gaseous refrigerant flows to the compressor where it is converted into a high pressure and high temperature gas. The hot refrigerant R744 does not contribute to global warming, the refrigerant passes through a heat exchanger which heats the water before it is pumped to the marine grade stainless steel storage tank.
The Sanden Eco Plus Hot Water Heat Pump is three times more efficient than a conventional electric heat pump with up to 50% faster recovery than ordinary available hot water system. The energy efficiency of the Sanden Eco Plus uses only 20% of the energy required by an electric storage hot water system and is a perfect system to use with Off- Peak Electricity for even more savings.
Sanden Eco Plus Superior Features
The Sanden Eco Plus Hot Water Heat Pump uses less electricity to heat water when compared to conventional hot water systems. Sanden Eco Plus Hot Water Heat Pump uses 1KW of energy to generate 4.5KW of heated water, that is 80% less energy compared to traditional hot water system and it could save up to 80% on your hot water bill.
Sanden Eco Plus Hot Water Heat Pumps use a split system where the heat pump unit and the marine grade stainless steel storage tank are installed separately. The Sanden Eco Plus Hot Water Heat Pumps are easy to install and the heat pump is on the whisper scale of volume, with industrial leading noise level of 37dB- very neighbour friendly.
The Sanden Eco Plus Hot Water Heat Pump has a higher coefficient of performance that results in reduced energy use and carbon dioxide emissions. The Sanden Heat Pump is up to 50% faster heat recovery than ordinary heat pumps. Sanden Eco Plus Heat Pump uses ozone friendly R744 Refrigerant and is designed to operate in all climates (i.e. -10℃ to +43℃ operating range). Sanden Heat Pumps have an automatic heating cycle, that makes it perfect for use with an Off- Peak tariff, alternatively, the heat pumps can be powered by a solar PV system. The whisper quiet operation of the Sanden Heat Pump include weather resistant construction for outdoor locations and a product warranty of 6 years.
Stainless Steel Tank
The High Quality Sanden Eco Plus marine grade stainless steel storage hot water tanks, include a size range of 160L, 250L, 315L short and 315L Tall. The Marine grade stainless steel storage hot water system is manufactured in Australia and is fully insulated for minimal heat loss with safety pressure and include a temperature relief valve. The Sanden Eco Plus stainless steel storage tank has 15 year warranty.
Eco Friendly R744 (CO2) Refrigerant
The Sanden Eco Plus Hot Water Heat Pumps use R744 Refrigerant also known as natural occurring refrigerant that does not harm the ozone layer that minimises global warming. The natural occurring refrigerant R744 performs higher compression efficiency, with lower energy consumption, allowing more energy to be used to heat the water (i.e. great thermodynamics ability). The refrigerant R744 gets heated quickly therefore the heated water temperature 65℃ is achieved almost instantly.
Sanden Eco Plus Hot Water Heat Pump absorbs heat from the ambient air and transfers it to heat water, it saves money, saves energy and reduces greenhouse gas emissions. Sanden is one of the leading hot water technology with environmentally advanced products, operating in Australia for over 35 years.